The basic principles of design and construction of hotel furniture in Foshan

1. Bearing capacity: fixed furniture is common in house furniture, which is generally constructed as flat plate type. Wood screws, hardware connectors and adhesives are selected for interface mode. When applying raw materials, pay attention to the properties of different types of materials, such as plywood, medium density fiberboard, etc., and the nail holding force is weak. It is not suitable for positions with frequent activities or strong wear resistance, such as door hinge screws, bottom rail screws, etc., which are very easy to loosen and make noise. The hardware pendants in the bed screen and frame wall need attention, or wood is used to replace the building steel bar. The popular building wood square is 45 degrees upside down.

If the cost of raw materials is very consistent with the application regulations, the use of low-cost raw materials, the use of a large number of wood at the same time to pay attention to the application of the same small raw materials, so as to further improve the utilization rate of wood. General hotel rooms a large number of furniture, the use of computer effective layout, size of raw materials development and utilization, reduce the cost of raw materials. Different structures need to pay attention to the comparison of raw material costs.

3. It can produce and manufacture the same raw materials more efficiently, which is very easy to produce and process, and that processing technology can save process costs and improve work efficiency, especially vertical milling, manual engraving, technology, etc., which is very easy to produce and process laser cutting, neat and neat.

4, transportation and installation of hotel buildings are generally relatively high, which requires the transportation of furniture to be light. In particular, there are some conjoined beds with extended desks. The elevator car cannot be transported. The freight elevator has already been removed during furniture installation. How to properly ship them must be especially considered at the material structure level of the net weight of the raw materials.

5, the safety factor of the general hotel on the amount of no aldehyde and no explicit provisions, and the fire safety requirements of furniture is relatively high. Fireproof plate, flame retardant paint, flame retardant cloth, etc. With the approval of the hotel, it can be applied from some places. High-end hotels and even provide for the wood used to make furniture to carry out fire safety solutions.

Foshan hotel furniture is how to install?

Foshan hotel furniture to buy back, although the furniture is very good, but also pay more attention to the key points of the furniture assembly process. If you don't notice it in the installation process, there may be many problems that have not been assessed, resulting in abnormal furniture.

General furniture in the manufacture of the product quality has been given a very standardized dimensions, so to install the case is very small due to the quality of the problems encountered. The problems encountered in the implementation of the measures and installation are all caused by unreasonable assembly. Big to the problem is: accurate measurement is not allowed to cause installation, which is also more common. The general user has no concept of limiting detection during the decoration period. During this period of time, the walls and roads have not been solved. The actual size is different from the decoration. This kind of thing can easily happen without installation. For example, the wooden cabinet has grown out, so don't climb the stairs when delivering.

There are also other reasons: the gap between the wall and the furniture, which is caused by the bending of the wall. There are seams between the door leaves, which are mainly caused by uneven roads. The sliding door of the drawer cabinet is blocked, and the vast majority of these are mainly caused by the uneven floor or the unreasonable adjustment of the installation personnel. The gap between the furniture and the wall is too large, which is mainly caused by the bending of the wall. Therefore, in order to prevent such a situation, the furniture interior designer can accurately measure the scene to avoid mistakes.