Hotel wall panelSix major issues in installation:

  1.Moisture-proof wall:After drying, it is easy to shrink and form loose cracks or cracks. Therefore, if the wall is wet, it should be dried before construction or moisture-proof treatment. First make a moisture-proof layer on the wall, and then apply waterproof and moisture-proof paint. After raising the bricks in the wall, separate the panel, keel and wall at a certain interval to prevent moisture from affecting the panel.

  2.Walls are clean:Before installing the hotel wall panels, the walls should be clean, dry and flat, and should maintain high elasticity. In order to adapt to the local weather conditions and achieve the moisture content in the air, before installation, the original packaging of the purchased wallboard should be unpacked and kept in place at least48Hours.

  3.Inspection of cable:Please check whether the top of the wall panel is straight before pulling the wire, and correct the problem in time. In order to prevent the thickness of the top rod of the retaining wall plate, uneven, cracking, etc.

  4.Design:The size is right. Before installing the hotel wall panels, you should first design the size of the wood blocks, find the square of each wood block, and then try to install it once, and then formally nail it after adjustment and repair to prevent the surface pattern from being chaotic, uneven colors, The edges and corners are not straight, the appearance is not flat, the joints are black, and the joints are not strict.

  5.Leaving seam:Wall panel surface height difference should be less0.5mm; The width of the joint between the panels should be uniform, and the size deviation should not be greater2mm; The diagonal length of a single panel should not be greater2mm; The deviation of the verticality of the panel shall not exceed2mm.

  6.Close to the panel:Skirting boards and pressure strips should be close to the panel and there should be no excessive clearance.

The above is the content collected by Guangdong Jinpai Gao Hotel Furniture Co., Ltd. Please contact us if necessary. The company is a well-known furniture manufacturer dedicated to the production of professional hotel furniture customization, design and decoration, and a modern large-scale enterprise integrating R & D, design, production and sales. Mainly engaged in Foshan hotel fixed furniture, Foshan hotel furniture, hotel fixed furniture customization, hotel room furniture customization, hotel wall panels, hotel new Chinese furniture, procurement, factory outlets. At present, the company has a standard plant3More than 10,000 square meters,3600Multifunctional product showroom of square meters, domestic patented technology70Many, the introduction of advanced furniture production equipment from Germany, Italy, the Netherlands and other countries, is one of the enterprises with popularity and development potential in China's furniture industry.