Hotel wall panelStructure

  There are two main structures of hotel wall panels: craft joints are left on one side, and internal corners are intersected (restricted) and spliced.

  1.Leave a seam on one side

  During the installation process, a bottom strip with the same thickness as the suspension strip should be added to the internal corners to prevent deformation and warping. The process seam of the inner corner must be coated with skin on the inside of the process seam, and the depth of the process seam should be consistent with the depth of the process seam of the entire large surface.

  2.Interior corner cross (limit) splice

  Same as the process joint on the side of the inner corner, during the installation process, a base strip with the same thickness as the suspension strip should be added at the inner corner to prevent deformation and warping. For cross (restricted) splices, the splice depth shall be consistent with the process joint depth of the large surface.

  Installation principle of hotel wall panel

  According to the pre-measured size, the hotel wall panels are divided into several pieces, and then trial installation and adjustment are carried out to prevent problems such as uneven color and irregular joints during the installation process.

  In order to avoid installation errors or installation defects, the hotel wall panels must be installed in a certain order.

  Install the large plate first, then the small plate;

  Install the wall first, and then install the door frame, pillar, window cover, etc.

  First install the hotel wall panel, then install the corner line, skirting line, etc.

  The design and installation of hotel wall panels is an important part of customization, and the closure of hotel wall panels is also a problem for home decoration companies. If the communication between the design department and the production department is not smooth, the problems of shrinkage and gaps will appear from time to time, which will affect the appearance of the entire home decoration and reduce customer satisfaction.

 The above is the content collected by Guangdong Jinpai Gao Hotel Furniture Co., Ltd. Please contact us if necessary. The company is a well-known furniture manufacturer dedicated to the production of professional hotel furniture customization, design and decoration, and a modern large-scale enterprise integrating R & D, design, production and sales. Mainly engaged in Foshan hotel fixed furniture, Foshan hotel furniture, hotel fixed furniture customization, hotel room furniture customization, hotel wall panels, hotel new Chinese furniture, procurement, factory outlets. At present, the company has a standard plant3More than 10,000 square meters,3600Multifunctional product showroom of square meters, domestic patented technology70Many, the introduction of advanced furniture production equipment from Germany, Italy, the Netherlands and other countries, is one of the enterprises with popularity and development potential in China's furniture industry.