What we knowHotel fixed furnitureUsually include: standard room furniture, suite furniture, presidential suite furniture. Generally speaking, no matter what the standard suite furniture is, its functional requirements and furniture composition are basically similar. It not only needs sleep and rest, but also has the function of writing and storing small luggage. When choosing hotel furniture, you can start from the following aspects:

Five Iron Laws of Hotel Fixed Furniture

      1.Whether the material is reasonable

      Different hotel fixed furniture has different surface materials. For example, the legs of tables, chairs, cabinets, hard materials are stronger and can bear weight, while other materials can also be used as internal materials. The thickness of the wardrobe leg only needs to reach2.5Centimeters, this is too thick, looks clumsy and too thin. Easy to twist deformation. Kitchen and bathroom cabinets cannot choose fiberboard materials, because fiberboard will swell and be damaged when exposed to water. Triple plywood materials should be used; dining tables should choose waterproof materials.

      2.Whether the moisture content of wood exceeds the standard

      The moisture content of hotel fixed furniture should not exceed12%. If the moisture content is high, the wood will only warp and deform. Generally, the customer did not check the equipment at the time of purchase, so you can use the touch feel method to touch the bottom surface of the furniture or the unpainted area inside (assuming it feels wet), and the moisture content is at least50% or higher, and the foundation cannot be used.

      3.Whether the structure is strong

      When choosing, small furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor, and then quietly fall. If the sound is loud, it means the quality is better; If the voice is dumb, there is a murmur. It indicates that the joint of the insert and tenon is not firm and the structure is not firm. You can shake the desk and table by hand to see if they are stable. You can sit on the couch. If you sit on the sofa, it will squeak when it moves quietly. If it trembles, it means that the nails will not take long. There should be four triangular clamps on the legs of square tables, bars, chairs, etc. to achieve a fixed effect. When choosing a table and chair, you can turn it over and have a look. The cloth chair can be touched by hand.

      4.Whether the four legs of the furniture are flat

      Place it on flat ground and you will know. See if the table is straight. You don't need to bend over or take in. You can use a piece of glass for testing. If the table top is raised, the glass plate will rotate when placed on it; If the table top is recessed, the glass plate will press on it. Cabinet doors and drawers should not be too large, and doors should not sag.

      5.The gap of veneer furniture is loose

      Whether it's pasting wood veneer,PVCOr paste the pre-coated paper, please pay attention to whether the leather is flat, whether there are bulging, blistering or loose seams. Check it out when you look at it, otherwise you won't be able to tell. Fraxinus mandshurica veneer furniture damage is relatively simple, generally only two years. For wood veneer, planing veneer is better than stripping. The way to identify the two is to look at the woodcuts. The sliced veneer has straight lines and dense lines, while the peeled veneer has curved and sparse marks. For furniture with particleboard veneer, the ground part must be sealed. If the edges are not sealed, the circuit board will absorb moisture, expand and damage.