Hotel room furniture generally includes:Standard room furniture, suite furniture, presidential suite furniture. The corresponding furniture generally includes:Baby bed, writing desk, luggage, TV cabinet, lounge chair, coffee table, bedside table, etc.

1.Whether the material is reasonable:Different hotel room furniture surface material is different. For example, the legs of tables, chairs and cabinets are relatively strong and can bear weight, while the internal materials can be made of other materials. As long as the thickness of the legs of the wardrobe reaches2.5Centimeters are too thick to be clumsy and too thin to bend and deform. Fiberboard materials cannot be used for kitchen and toilet cabinets, because fiberboard will swell and damage when exposed to water, so plywood materials should be used. The dining table should be made of waterproof materials.

2.Whether the moisture content of wood exceeds the standard:The moisture content of hotel room furniture shall not exceed12%. If the moisture content is high, the wood is easy to warp. When consumers buy, there is no detection instrument, and they can touch the bottom or inside of the furniture with their hands. If it feels wet, the moisture content is at least50%The above cannot be used at all. Another way is to sprinkle a little water on the unpainted parts of the furniture wood. If there is no flooding phenomenon or soaking is slow, the water content is higher.

3.Whether the structure is firm:Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor and gently put down. If the sound is crisp, the quality is better. If the voice is dumb, there will be a splitting sound, indicating that the mortise and tenon joint is not tight and the structure is not firm. Writing desks and tables can be shaken by hand to see if they are stable. You can sit on the couch. With a slight movement, it will squeak and shake, and the nail will not live long. Square tables, bar tables, chairs, etc. There should be four triangular clips to hold them. When selecting, you can turn over the tables and chairs and touch the cloth-wrapped chairs with your hands.

4.Whether the four legs of the furniture are flat:Put it on flat ground and you'll know that. See if the table is straight. You can test it with a piece of glass. Don't bow your back or shrink your waist. If the desktop is raised, the glass plate will rotate on it; if the desktop is recessed, the glass plate will break when pressed. The joint between the cabinet door and the drawer should not be too large, should be horizontal and vertical, and the door should not sag.

5.The seams of veneer furniture are not strict:Whether it is wood skin,PVCOr pre-coated paper, we should pay attention to whether the leather is flat, bulging, blistering. Look at the lights when checking, otherwise you can't see them. Fraxinus mandshurica veneer furniture is easily damaged and can only be used for two years. In terms of wood veneer, edge-planed veneer is better than rotary-cut veneer. The way to identify the two is to look at the pattern of the wood. The wood grain of the sliced veneer is straight and dense, and the pattern of the rotary cut veneer is curved and sparse. For furniture covered with particleboard, the landing part must be sealed. If the board is not sealed, it will absorb moisture, expand and be damaged. General veneer furniture corners are easy to warp. When choosing, you can buckle the corners with your hands. If it is buckled, there is a problem with the glue.