Hotel furniture manufacturers: hotel furniture design considerations

When designing the material structure of hotel furniture, we can focus on the following aspects.

Hotel furniture manufacturers: appearance quality.

First of all, the appearance quality requirements of furniture table flat, fine workmanship, exquisite decoration, clear and beautiful texture. Houses usually use particle board, medium density fiberboard, blockboard, laminate, etc. As the base material, veneer, veneer and plywood are used as the covering material. Different substrates and cladding materials have different material characteristics. Not paying attention to the material characteristics and correct use methods often cause the board to warp. The structural characteristics of the cladding materials on the back and front of the plate should be the same or similar. The moisture content of the base material is generally 6 ~ 10%, and the selected materials should be the same batch as far as possible. When processing in the workshop, try to shorten the press time, different material characteristics, different moisture content of the cladding material, and pay attention to different coating thickness, pressing time and pressure.

Hotel furniture manufacturers: structural strength

The furniture in the guest room is mostly fixed furniture, mainly with general structure plate, and the connection method is wood screw, hardware connection piece and adhesive. When using materials, attention should be paid to different material characteristics, such as particleboard and medium density fiberboard, which have poor nail holding capacity. It is not suitable to be used in parts that require frequent movement or strong nail grip, such as door hinge screws, oil pumping rail bottom rail screws and other parts that are easy to loosen and generate noise. Special attention should be paid to the hardware on the screen and frame walls, or the use of wood instead of steel.

Hotel Furniture Manufacturers: Material Cost

Under the same conditions, try to use low-cost materials, and pay attention to using the same small materials while using large surface materials to improve the utilization rate of the board. Rooms usually have a lot of furniture. Try to use computers to arrange the layout reasonably, make comprehensive use of large and small materials, and reduce material costs. Different structures, pay attention to the comparison of material costs.

Hotel furniture manufacturers: efficient production

Under the same material cost, that kind of material is easy to process, that kind of process can save process cost and improve efficiency, especially in the process of end milling, router, and engraving, that kind of material is easy to process and cut, and easy to level.

Hotel furniture manufacturers: transportation and installation

Hotel floors are generally higher, requiring furniture to be light in weight and easy to transport. In particular, some conjoined bed backs and some lengthened desks cannot be transported by elevators, and the freight elevators have been removed when installing furniture. How to transport safely requires special consideration from the weight and structure of the material.

Hotel furniture manufacturers: safety performance

General hotel on the amount of free formaldehyde is not clearly defined, but there are furniture fire requirements. If the hotel allows, some parts can use fire board, anti hot paint, flame retardant fabric, etc. High-end hotels even require that the wood used to make furniture should be fireproof.